Waste Engine Black Car Lube Oil Recycling Machine Oil Recovery Purification System Machine

Waste Engine Black Car Lube Oil Recycling Machine Oil Recovery Purification System Machine

waste motor black auto lube oil recycling machine oil recovery purification system machine

1.Waste engine oil waste auto motor oil refinery to base oil ?
The main technologies of waste oil regeneration in overseas is Kleen,Meinken,IFP,KTI,Snamprogetti,DOH,DCH,BERC and Recyclon.etc.New procedures that have been applied overseas consist of ultrafiltration, centrifugal separation, molecular distillation, flocculation, solvent refining, and so forth.In the late eighties, two regeneration processes ended up developed in China.1 is distillation-extraction-clay procedure, which utilizes ethanol as solvent for extraction the other is higher temperature clay approach, which combines distillation and clay remedy in the same method.Modern thin movie evaporator - furfural refining-clay method can extract more foundation oil fractions than typical vacuum distillation, furfural has greater extraction result than ethanol, and the generate of foundation oil is greater.
According to the deterioration system and degree of lubricating oil, the regeneration engineering of waste engine oil can be divided into re-purification procedure, wonderful refining approach and re-refining method.

2.Technology of our organization

 one) Method stream description

The approach of squander oil reduction and regeneration base oil is introduced as follows: Our company specializes in the creation of waste oil regeneration tools and approach study and development for far more than ten several years, and continuously explores and enhances the technologies. Combining with the advantages and negatives of the existing products method, we target on the components in the method of squander oil processing gear, which are effortless to coke at higher temperature, have substantial functioning expense and have numerous prospective basic safety dangers. The issue of large overhaul price and higher technological issues has been reviewed and analyzed, and a good deal of manpower and material methods have been invested. Via repeated screening and steady improvement, the problem of straightforward coking of supplies at higher temperature has been successfully solved.

 2)Project overview(Illustrations for reference)
one)Project Name: eighteen,000T/a waste lubricant recycling task
two) Character of the sector: waste resources and recycling of waste components
3) Complete investment decision: twenty million yuan
4) Land spot: fourteen,000 square meters, building spot five,a hundred and twenty square meters
five) Greening region: The whole plant has a environmentally friendly spot of 1820 square meters, and the greening price is 13%
6) Number of personnel: 30 staff users
7) Hours of work: three hundred times for the entire calendar year, 24 hours for the working day, and seven,two hundred hrs for the complete 12 months

one.Lower expense, low wastage and high generate.89-96% high recovery rate
two.Can be employed as the foundation oil of worldwide specifications, SN150.SN250.SN350
three.Simple to run

four.Major Equipment introduction

1)Distillation tower introduction

Fractionating tower with structured packing

The tower is divided into:

a.In the leading of the tower, the solution is the 1st-line oil.

b.2nd-line return and recovery section, the solution is second-line oil

c.Third-line return and restoration segment, the product is 3rd-line oil
two)Tank and warehouse storage

5.The good quality of oil from our client:


six.Major merchandise testing index

(Third-line oil) finished product quality inspection standard HVI250
one Test items Indicators Reference standard
two Flash point ≥220ºC

GB/T3536-1983   Flash point and flash point determination of 

petroleum products (Cleveland open cup method)

three Pour point ≤-12ºC GB/T3535-1983  Petroleum products pour point measurement method
4 Chroma two GB/T6540-1986  Oil product color measurement method

Kinematic viscosity

 (40 degrees)


GB/T265-1988  Kinematic viscosity measurement and dynamic 

viscosity measurement of petroleum products 


Kinematic viscosity

 (100 degrees)


GB/T265-1988  Kinematic viscosity measurement and dynamic 

viscosity measurement of petroleum products 

seven Viscosity index ≥100  GB/T1995-1998   Oil Products Viscosity Index Calculation Method
8 Acid value ≤0.03(mgkoh/g)  GB/T264-1983  Oil product acid value measurement method


(54 degrees)

≤10min GB/T7305-2003  Separation of oil and synthetic liquids
ten Water content Trace GB/T260-1997  Oil Products Water Content Measurement Method

7.Packing and Offering

Used Motor Oil/Pyrolysis Oil Recycling Plant to Foundation oil .

Packing Details : Wood scenario bundle of common export.

Supply Details : 15-thirty days following obtained the deposit.

We will give the most reputable, safest method of transportation, in buy to preserve transport value.

We will supply the most dependable, safest method of transportation, in order to help save transport cost.

8.Successfull Set up


1.what process are you making use of ? 
The procedure of scraping movie evaporator 
two.what is the output parameters of the base oil ? 
we can get international common base oil ,like SN250. SN150.SN350 . 
3.did you at any time develop some plants in china ? can we see it ? 
sure ,we have built some waste oil refining to base oil plant ,
you can visit the plant if you appear to china . we truly welcome you to arrive to china to go to our plant .
four. do you have skilled engineer to assist oversea services ?
yes , we have skilled engineer to support oversea provider .
5.can you provide oversea installation ?
indeed ,we can supply oversea set up support

Waste Engine Black Car Lube Oil Recycling Machine Oil Recovery Purification System Machine